Use a flexible branch for your bow.
Making an Indian bow and arrows with your kids is an educational craft that will bring hours of entertainment. Several different kinds of wood will work for the bow, but make sure the stick is green so that it is more bendable. Native Americans primarily used a bow and arrows for hunting and sometimes as a weapon. Use your bow and arrows for target practice and hold contests to see who can shoot the farthest.
Instructions
Making an Indian Bow
1. Choose a green stick approximately 6 feet in length and about 1 inch in diameter consistently from one end to the other. The best woods to use include cedar, ash, elm, willow and hemlock. Pine is not a good choice since it breaks easily. Green sticks are the best because they provide flexibility.
2. Carve a shallow notch around the circumference of the stick about 1 inch from one end of the stick. Repeat on the other end so both ends of the stick have notches. These are to hold the string in place.
3. Cut a piece of nylon string about 6 to 8 inches shorter than the bow. Tie one end of the string to one end of the bow, fitting it into the groove.
4. Make a slipknot in the loose end of the nylon cord. Place the end of the bow with the tied string against the ground. Slowly bend the bow until the slipknot fits over the other end of the bow into the groove. Tighten the slipknot. This forms your bowstring.
5. Check the fit of the bowstring by holding the bow in the middle with one hand and gently pulling the string back. The string should be tight and the bow should bend without breaking.
6. Wrap duct tape around the middle of the bow. This makes a handle so your hand does not slip while shooting the bow. Add extra tape to the top of the handle to make it thicker for an arrow rest.
Making Indian Arrows
7. Select five to six straight sticks about 3 feet in length and approximately 1/2 inch in diameter. A hollow reed or willow branch work best. The stick can be either green or dry.
8. Make an arrow tip by whittling one end of the stick into a sharp point. If using a green stick, char the pointed end over a fire to harden it.
9. Cut a 1/4-inch notch into the stick opposite the pointed tipped end. This makes a place to rest the arrow onto the bowstring. Add a feather if desired to this end. Cut a small feather down the middle. Attach each half of the feather on opposite sides of the stick on the notched end. Use hot glue to hold in place. If desired wind leather cording around the back edge of the stick holding the feathers in place. Repeat Steps 2 and 3 for all the arrows you are making.
Related posts
Making traditional arrows is a skilled craft.Before gunpowder fueled weaponry, Native Americans used such things as spears, clubs, knives and bows and arrows as their hunting tools and tools of wa...
Hanging Indian headdresses are a quick, colorful and fun project.Indian headdresses bring to mind colorful beading and feathers in an array of patterns and designs. According to the Native Languag...
A butterfly headband makes an attractive summertime accessory for girls and women. Not only will it provide an appealing way to keep hair out of your eyes, but you can also have fun making it. Hot...
Make a voodoo doll for healing or protection rituals.Many pagans and voodoo practitioners have used voodoo dolls, also called poppets, as magical conduits for hundreds of years. Users make these s...
The Cherokee tribe tended to use sinew thread and stone arrow points.River cane, or Arundinaria, was a widely used resource among tribes that inhabited the American Southeast, including the Cherok...
