Monday, September 16, 2013

Refelt The Cushions On The Billiard Table

Damaged cushions of a pool table can be recovered with felt.


Older pool tables can be refurbished by applying new felt. Complete refelting usually includes applying felt to both the table and the cushions. In some cases, possibly due to an accident or other damage, only the cushions have new felt applied. Although there are several steps to the process, it can be accomplished by a do-it-yourselfer with a little skill and the proper tools.


Instructions


Preparing the Pool Table Cushion


1. Remove the rail from the pool table. Working on the cushion will be easier if the rail can be turned and worked on from both sides.


2. Remove the feather strip from the top of the rail. The feather strip is a thin metal strip that holds the top of the felt covering the cushion in place. Start at one end and pry the feather strip loose with a screwdriver. Work carefully to avoid damaging the wood behind the cushion.


3. Remove the rubber cushion from the rails of the table. This step is optional and only needs to be done if the cushion is damaged.


4. Remove the pocket protector, a small piece of plastic that protects the end of the cushion at the pocket. If it is carefully removed, it can usually be reused.


Refelting the Cushions on a Pool Table


5. Cut the new felt cushions to length and angle. This is only necessary if the cushions were removed earlier. Make the cuts with a sharp utility knife. Use the old cushions for a pattern or make measurements of the table and angles. Glue the cushions to the rail using contact glue.


6. Cut 6-inch wide strips of felt for the cushions. If the entire table is being recovered, the strips for the cushions are cut from the edge of the larger piece. If only the cushions are being recovered, the strips can be cut from any proper piece of felt.


7. Attach the felt to the top of the rail using the feather strip. Place the felt with about a quarter of an inch extending past the feather strip on the top. This will be trimmed off later.


8. Turn the rail over and stretch the felt over the cushion. Staple the felt in place under the cushion. Replace the rails on the table.








Related posts



    Peacock feathersFeather centerpieces add a glamorous and exotic feel to a party or wedding. Ostrich plumes are a popular choice, because they can be dyed any color to match a theme. Peacock and ph...
    If you are a frequent backgammon player, then a backgammon table (one that has a backgammon game board printed on it) is a great choice. It gives you a permanent game board that you can play at an...
    A router table is a map to different computers and subnets on your Windows network. You add a routing table using the Windows command line. Windows typically builds a routing table automatically,...
    Give Your Sofa A Facelift!Does sitting on your sofa remind you of sitting on the high school's bleachers? You don't need to spend thousands on new furniture; you just need to give your sofa a face...
    Make a Kentucky Derby hat that rivals the stars.Strut your flair for the flamboyant at the Kentucky Derby by wearing a hat that you have made yourself. You can use a quick crafty tip to make the c...